| The total capacity of the mixer | 500ml | Motor power | 7.5KW |
| Power take-off speed | 2~150Rpm | Rotor ratio | 1:1.1 |
| Temp. control accuracy | ±1℃ | Torque sensor | Electronic direct-link torque measurement |
| Feeding port pressing method | Hydraulic pressing | The pressure of the pressing block on the material | 0.3~0.6Mpa |
| Cooling of the mixing chamber and the front and rear rotors | Water | Temperature control | 3-Zone |
| Maximum heating temperature | 350℃ | Torque measurement range | 0~500Nm |
| Torque measurement accuracy | 0.1~0.5%FS | Control mode | Manual, automatic, computer PLC |
| Computer measurement and control | Torque, temperature, rotational speed | Rotor type | Banbury |
| Control analysis software | Melting, Thermal Stabilization, Crosslinking, Superposition, Customization |